New
Model: 109789
Fuel Injector Harness 14 Gage (DENSO) 86/87 Also TTAFactory appearing Fuel Injector harness using 14 gauge wire, recommended for use in high performance racing applications where low impedance DENSO injectors are used.
INSTALLATIONin PDF format..
$105.01
Model: 103008
Denso 4 Wire sensor Blk SqFour wire heated o2 sensor, made by DENSO VERY active, currently used on our Heated Oxygen Sensor Upgrade Kits. By design, high tolerance to impurities and additives in the fuel system, last considerably longer than non-heated sensors. Also more tolerant to lead poisoning, ..
$62.95
Model: 102111
86-87 Positive Battery Cable High CurrentSimilar to our standard replacement battery cable, except the alternator feed is 6 gage cable. This cable is utilized when the alternator is upgraded to 175-200 amp unit. Design includes an added 3.5" of length to the starter cable, to prevent contact with af..
$94.81
Model: 102031
Battery & Extension Cable 1986/1987Factory positive cable problems, and fuselink problems with the OEM setup prompted us to design this relocation kit. This custom-designed kit provides a convenient junction for the positive battery cable AND relocates the fuse links from the starter stud to the..
$119.99
Model: 102026
Battery Negative Cable 84/87Eliminate electrical "gremlins" with a new cable. Our negative cable is manufactured to OEM specifications, using the new "slip-over" terminal cover design. Secondary ground pigtail wire included...
$34.63
Model: 102043
Battery Positive Extender Heavy DutyThis specially built kit is designed to: 1) to re-locate the fuse links from the starter location to a location in the engine bay for easy access, 2) to allow for easy attachment of accessories to the battery positive terminal, 3) to add extra fuse links so that e..
$139.99
Model: 103100
Casper's Power Pack for 1986/1987 Turbo RegalSpecially designed kit that provides wiring upgrades for every potential "weak spot" on your turbo Regal. Designed for the most popular 1986 and 1987 model years. Complete package for stock to modified GN's and turbo Regals. Special price saves you 10% ov..
$394.69
Model: 102087
CCCI HOTWIRE 86/89Designed to interface with your 86-89 CCCI ignition system, this specially made harness provides increased voltage and current to the ignition coils. Attaches to your battery positive junction or alternator stud, and provides as much as 20% more power to the ignitio..
$125.00
Model: 102060
CCCI Ignition Harness 1986/1987This harness is designed to power up the CCCI ignition system components for use on other applications or race applications using a DFI or SpeedPro (FAST) ECU. Provides connections to the CCCI Ignition Module (Part No. 107125 and 107128), CAM sensor (Part No. 107102) a..
$79.51
Model: 102044
Fan Hi/Lo Switch 1986/1989This kit is designed to allow control of your coolant fan from the drivers seat. Plug-And-Play, the three position miniature toggle switch allows you to set your coolant fan to high or low speed at any time. Center position is normal (chip) control. Simple installation, plu..
$42.79
Model: 102032
Field Fix Harness 1986-1989 GN/TTA This simple "Plug-And-Play" harness is designed to assure un-interrupted charging system function. It provided backup current to the field of the alternator in case the engine's own system fails, assuring a fully charged battery under otherwise "tow-truck" conditio..
$42.79
Model: 102038
Fuel Injector Dyno Harness 1986/1987 Also TTAUsed in dyno applications where the lengths of each connector are equal. Also can be used for sheet metal intake applications...
$105.01