Model: 109103
109103 LS1/LS2 to LS3/LS9 MAP ADAPTER05-07 Corvette , 06 GTO or later 3 bar map adapter can be used on a Corvette supercharger application
..
$26.47
Model: 109103-26
109103 LS1/LS2 to LS3/LS9 MAP ADAPTER 26"05-07 Corvette , 06 GTO or later 3 bar map adapter can be used on a Corvette supercharger application
..
$26.47
Model: 109004
12" SQR GRAY Extension When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this ca..
$26.47
Model: 109133
ANOTHER EXCLUSIVE FROM CASPER'S ELECTROINCS!
Need to tap off the LS2 / LS7 Electronic Throttle Control cable for nitrous? Or are you installing a supercharger that requires you to cut the OEM wires and lengthen this connector? Well, you will not have to cut any longer! CASPER'S ELECTRONICS proud..
$48.91
Model: 109005
24" SQR GRAY Extension When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this ca..
$26.47
Model: 109019
IAT Extension 36" When installing aftermarket cold air intake in your vehicle, the inlet air temperature (air temp sensor / intake temp sensor) sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splic..
$26.47
Model: 109049
A/F Pigtail SquareAllows aftermarket air-fuel gage to be added to your current front oxygen sensor signal, with complete plug-in capability. Signal wire exits the plug-in assembly and allows addition of wire to your gage...
$18.31
Model: 103032
Breather - LS1 & 3800
This is a chrome top Breather Assembly with heavy duty
billet Aluminum base. Bayonet type lock attaches securely
to the valve cover. Used on the LS1 GM engine and Supercharged 3800
Series II engine. Bayonet twist-lock mounts securely and seals with
an O rin..
$46.00
Model: 102159
Hi-Lo Fan Controller - C6 Corvette, Z06, ZR1 Part Number 102159 For Model Years 2005 - 2013 Finally, a manual fan controller for the C6! New design Plug And Play module installs easily to the PWM-controlled coolant fan found on the C6 Corvette. The factory coolant fan is powerful and incorpora..
$100.88
Model: 102158
102158 Exhaust Valve Bypass Switch – C6 Corvette Z06
This kit is designed to permit instant manual bypass of the two exhaust valve butterfly valves present in the Z06 muffler, giving the driver full control of maximum exhaust flow. The 102158 is a Plug-And-Play which includes only the switch and pl..
$48.91
Model: 108032
Coolant Fan HarnessLocated on cooling fan assembly. Includes the three wires with ring terminals, connects to fan motor and low speed resistor.KNOWN MAKES/MODELS: 86/87 GN C5 & C6 CORTVETTES..
$17.07