Model: 109235
24" BLK SQ High Temp When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this can ..
$27.49
Model: 109019
IAT Extension 36" When installing aftermarket cold air intake in your vehicle, the inlet air temperature (air temp sensor / intake temp sensor) sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splic..
$26.47
Model: 109047
A/F Pigtail - FlatUsed on OBD I and II applications using the four wire sensors. Allows aftermarket air-fuel gage to be added to your current front oxygen sensor signal, with complete plug-in capability. Signal wire exits the plug-in assembly and allows addition of wire to your gage...
$18.31
Model: 109049
A/F Pigtail SquareAllows aftermarket air-fuel gage to be added to your current front oxygen sensor signal, with complete plug-in capability. Signal wire exits the plug-in assembly and allows addition of wire to your gage...
$18.31
Model: 103032
Breather - LS1 & 3800
This is a chrome top Breather Assembly with heavy duty
billet Aluminum base. Bayonet type lock attaches securely
to the valve cover. Used on the LS1 GM engine and Supercharged 3800
Series II engine. Bayonet twist-lock mounts securely and seals with
an O rin..
$46.00
Model: 109089
CAM HARNESS 40inchesThis harness allows the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. This harness is perfect for LS2 motor conversions. Compatible with the PCM harness in LS1 Corvette and F-Body cars.- Ful..
$26.47
Model: 108032
Coolant Fan HarnessLocated on cooling fan assembly. Includes the three wires with ring terminals, connects to fan motor and low speed resistor.KNOWN MAKES/MODELS: 86/87 GN C5 & C6 CORTVETTES..
$17.07
Model: 108031
Coolant Fan Splice Engine SideReplaces broken/damaged harness end cooling fan connector. This connector has three female terminals and 12 gage wires.KNOWN MAKES/MODELS: 86/87 GN C5 & C6 CORTVETTES..
$17.29
Model: 109043
Corvette Euro Headlight Harness 9005/9006 to H4This kit is a plug-and-Play harness using sealed relays and OEM connections designed to drive AND brighten the headlight system for late model Corvette using the H4 EURO spec. headlamp housings. System attaches to the alternator stud or battery positive..
$134.00
Model: 102154
Corvette Hotwire 2003 C5 & C6This kit is designed to install into your late model Corvette and is designed to overcome the losses associated with factory wiring to the fuel pump. Because of the heavy 12 gage feed, sealed relay and attachment to the output stud of the alternator, extra voltage an..
$62.30
Model: 102156
Corvette Hotwire Kit C5 - 1997 - 2002The Fuel Pump Hotwire Kit allows you to replace the stock, inadequate 18 gauge wire with a new 12 gauge feed using all OEM plug and play connectors! No wires to cut! This kit will increase the voltage at the fuel pump on average 2.5 volts. Make the most out of yo..
$73.39