Menu
Your Cart
February 2026 - NEW WEBSITE LAUNCHED!  If you encounter issues, please reach out and contact us! 

SPLICES AND PIGTAILS

Splices work on a variety of GM vehicles.

Model: 108077
Fuselink Connector Harness Mate - TTALocated on the engine harness, 89 TTA, connects to the positive battery cableand provided two 12 gage feeds. Frequently a victim of acid damage, thisassembly assures proper connection to the fuselinks. Mates with our 108076,found on the positive battery cable...
$9.13
Model: 108003
Hi Speed Fan Relay Connector SpliceReplaces HI speed fan relay connector, drivers side inner fender well. Unsealed connector has one 12 gage red wire...
$17.29
Model: 108059
HI Temp Switch Splice -86/89This connector is found directly under the throttle linkage attached to the hi temp switch that controls the delay relay. Single green/yellow stripe wire...
$9.13
Model: 108062
Hot Engine Switch Splice 1984 / 1989Plugs into the switch located in front of the intake, near the radiator hose inlet. Switch actuates the HOT light on dash. ..
$9.13
Model: 108038
IAC Extender - 84/89Use this extension when you need to access IAC connector without removing turbo inlet pipe. Makes access to the connection easy. ..
$17.29
Model: 108037
IAC Relocator - 84/89This wiring kit allows you to extend the terminals on an IAC motor, by plugging individual wires into the four connector terminals. Requires silocone sealant after terminals are inserted. Maximizes distance between the IAC connector and larger than stock turbo housing. Frequentl..
$13.21
Model: 108093
IAC Splice - 84/89 Replacement for the IAC connector, frequently found with a broken latch. Located in front of the throttle body facing the turbo inlet pipe. For 86-89 turbo engines, color coded wires match OEM...
$9.13
Model: 108034
Injector Harness Car Side Pair - 84/85This pair of TWR connectors, both 3 and 4 cavity Weatherpack, found on engine harness, connects to the injector harness...
$26.47
Model: 108010
Injector Harness Engine Side Splice - 1986 / 1989 A common failure due to heat drying out the plastic, making them brittle, these wiring connector replacements are exactly as original. This connector is used on the engine wiring end of 86-89 turbo cars, NOT the Injector harness end...
$24.43
Model: 108011
Injector Harness Intake Side Splice - 1986 / 1989Female 7 cavity connector with male pins as used on the injector harness. This is the Intake End for 86-87 cars, part of the injector harness...
$24.43
Model: 108055
Knock Sensor Splice - 84/89Found under coil module, single cavity oval connector, blue wire. Plugs into Knock sensor on engine block...
$9.13
Showing 49 to 60 of 85 (8 Pages)
PLEASE NOTE:
This is CASPERS new website. We have created this one from scratch so you may need to create a new account in order to use it. We have not carried over any accounts from our old website.