Model: 108110
Heated O2 Sensor Kit ONLY 86/87 Wiring HarnessPlug-and-Play harness installs in minutes with NO wires to cut or splice. Harness plugs into the 86-89 turbo Buick engines and provides perfect electrical connection to a 4 wire heated sensor, AFS 109 or similar using a square female connector (with male..
$56.05
Model: 108091
Hi Performance Fuse Link Kit 5 Links..
$26.47
Model: 108003
Hi Speed Fan Relay Connector SpliceReplaces HI speed fan relay connector, drivers side inner fender well. Unsealed connector has one 12 gage red wire...
$17.29
Model: 108059
HI Temp Switch Splice -86/89This connector is found directly under the throttle linkage attached to the hi temp switch that controls the delay relay. Single green/yellow stripe wire...
$9.13
Model: 108062
Hot Engine Switch Splice 1984 / 1989Plugs into the switch located in front of the intake, near the radiator hose inlet. Switch actuates the HOT light on dash. ..
$9.13
Model: 108038
IAC Extender - 84/89Use this extension when you need to access IAC connector without removing turbo inlet pipe. Makes access to the connection easy. ..
$17.29
Model: 108101
IAC MP to F-WP AdapterThis adapter converts your early GM wiring harness plug to the late model IAC found on later GM throttle bodies. 4-wire Plug-And-Play adapter is approx. 5 in. long...
$24.43
Model: 108037
IAC Relocator - 84/89This wiring kit allows you to extend the terminals on an IAC motor, by plugging individual wires into the four connector terminals. Requires silocone sealant after terminals are inserted. Maximizes distance between the IAC connector and larger than stock turbo housing. Frequentl..
$13.21
Model: 108093
IAC Splice - 84/89
Replacement for the IAC connector, frequently found with a broken latch. Located in front of the throttle body facing the turbo inlet pipe. For 86-89 turbo engines, color coded wires match OEM...
$9.13
Model: 108010
Injector Harness Engine Side Splice - 1986 / 1989
A common failure due to heat drying
out the plastic, making them brittle, these wiring connector
replacements are exactly as original. This connector is used on
the engine wiring end of 86-89 turbo cars, NOT the Injector harness
end...
$24.43
Model: 108011
Injector Harness Intake Side Splice - 1986 / 1989Female 7 cavity connector with male pins as used on the injector harness. This is the Intake End for 86-87 cars, part of the injector harness...
$24.43
Model: 108055
Knock Sensor Splice - 84/89Found under coil module, single cavity oval connector, blue wire. Plugs into Knock sensor on engine block...
$9.13