Splices work on a variety of GM vehicles.
Model: 108095
Alternator Connectors Mating Pair w/ wiresThis pair of connectors will not only replace a defective alternator plug but provides a MATE for the alternator plug. This allows insertion of any accessory to the regulator side of the alternator. These plugs are used on our "Plug-And-Play" Volt Booster fo..
$24.43
Model: 108076
Battery Cable Fuselink Connector - TTAThis connector is found on the positive battery cable, 89 TTA, and containstwo fuselinks. Feeds the ECM MEM control and fuel pump relay. Replaces the OEMsetup frequently damaged by battery acid. Mates with our 108077,which is the engine harness side...
$9.13
Model: 108028
C-100 Bulkhead Splice 1984 / 1987 Turbo RegalThis critical feeder connector is located on the drivers side, directly below the power brake system. Part of the main wiring harness, it connects thru the firewall and contains all feeders. Body wiring connector attaches to the open half. Since it is uns..
$64.77
Model: 108049
C437 Mating Connector with Terminals - 84/87For the do-it-yourselfers, this connector assembly is the actual harness connector found on the dash harness which mates with the two connectors on the engine harness, near the ECM. NOTE: Proper crimp tool required for proper installation...
$26.47
Model: 108050
C437 Mating Pair - 84/87Located under throttle linkage, on top of lower intake. Attaches to hi temp switch, green wire with yellow stripe, controls hi speed relay and delay relay. ..
$31.57
Model: 108021
Cam Sensor Splice 1984 / 1989This connector is part of the actual CAM sensor, on the sensor end, NOT THE HARNESS END...
$9.13
Model: 108020
Cam Sensor Splice Engine Side - 1984 / 1989Buick Turbo Regal and Pontiac Turbo TransAm..
$9.13
Model: 108063
Canister Purge Splice -84/89Located at charcoal cannister, front driver's side near radiator core support. Red connector, 2 cavity...
$9.13
Model: 108017
CCCI Connector With Terminals and SealsFor the do-it-yourselfers, this connector assembly is the actual harness connector used on the CCCI module, 1984-1989. Black connector comes complete with 14 Pull-to-Seat 16 gage terminals. NOTE: Proper crimp tool required for proper installation...
$27.49
Model: 108013
CCCI Splice - 1984 / 1985
Repair damaged or corroded C3I
module connector This splice end is used on 1984-1985
ONLY.*FOR THE WIRING DIAGRAM CLICK LINK BELOW:http://www.installationinstructions.com/108015.pdf..
$31.57
Model: 108014
CCCI Splice - 1986 / 1989Repair damaged or corroded C3I module connector This splice end is used on 1986-1989 ONLY.*FOR THE WIRING DIAGRAM CLICK LINK BELOW:http://www.installationinstructions.com/108015.pdf..
$31.57
Model: 108015
CCCI Splice with Crank and Cam Plugs - 1984 / 1985Repair damaged or corroded C3I module connector This splice end is used on 1984-1985 ONLY. Includes both crank and cam connectors...
$69.95