Search Criteria
Products meeting the search criteria
PART NUMBER: 109018
IAT Sensor Extension 24"
When installing aftermarket cold air intake in your vehicle, the inlet air temperature (air temp sensor / intake temp sensor) sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut an..
$26.47
PART NUMBER: 109019
IAT Extension 36" When installing aftermarket cold air intake in your vehicle, the inlet air temperature (air temp sensor / intake temp sensor) sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splic..
$26.47
PART NUMBER: 107136
Air Temp Sensor 3/8" Fits in collar of K&N or similar air filter. Use this sensor when installing 87 style ECM on your 84-85 turbo car. Compatible with our 102065 MAT Installation Kit...
$20.35
PART NUMBER: 108053
Air Temp Sensor Splice
Replace your damaged or corroded MAT sensor connector with this replacement pigtail. Includes connector, and 17" pigtail and 2 heat shrink butt splices...
$9.13
PART NUMBER: 107127
Air Temp Sensor OEM - 86/89
Found near the Mass Airflow sensor at the inlet elbow, gray two-wireconnector. Senses inlet air temperature, which scales air/fuel thru the ECM.size: 3/8 NPT..
$26.47
PART NUMBER: 103028
Designed for the "Do It Yourself" crowd, the 103028 Connector Kit contains a gray 2-way connector used on the Air Temp Sensor, known as "AIT" or "ATS", and a mating connector. The mate is a solder-type molded connector and the pinned connector is the "Pull-To-Seat" style which means you must first p..
$15.25
PART NUMBER: 103029
Designed for the "Do It Yourself" crowd, the 103029 Connector Kit contains a gray 2-way connector used on the Air Temp Sensor found on the DODGE vehicles, and a mating connector. Kit includes both male and female terminals and seals.Note: Sealed Double D style crimp tool is recommended...
$15.25
PART NUMBER: 108100
Mass Air/Air Temp. Adapters
Plug-And-Play adapter converts the 3-wire LT1 engine harness connector to plug directly into the 5-wire LS1 MAF sensor. Incorporates the AirTemp connector into the adapter to connect directly to the gray AirTemp sensor connector from the engine harness. ..
$31.57
PART NUMBER: 109017
IAT / AIR TEMP SENSOR EXTENSION 12"When installing aftermarket cold air intake in your vehicle, the inlet air temperature (air temp sensor / intake temp sensor) sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cann..
$26.47
Showing 1 to 9 of 9 (1 Pages)