WIRING CONNECTOR KITS
CASPER'S EXCLUSIVE
OEM Manufacturer
PART NUMBER: 410054-K
Casper's Sumitomo Mate 4 way connector Kit. CASPER'S EXCLUSIVE! Made of the same high-temperature, strong material OEM connectors are made of.Comes with the Following:1 connector 4100542 locks 4270854 seals 4090044 terminals..
$33.61
PART NUMBER: 103017
Firewall feed-thru bulkhead 22 cavity WeatherpackThis sealed bulkhead uses Weatherpack® terminals and has 22 cavities. Ideal for custom engine installation when you dont want to use the factory wire harness. The bulkheads can be easily hidden under the coil pack giving your engine wiring that "stea..
$30.95
PART NUMBER: 103049
Description:
103049 Terminal Kit, XFI
This kit contains 12 terminals, including two on wires, for use
with option installation on the XFI or AEM ECU.
Terminals must be crimped onto wire using proper "Double-D" type
crimp tool.
Two of the terminals in this kit are affixed to wires and can be
u..
$14.23
PART NUMBER: 109154
Universal sealed MAXX-Fuse Holder DIY Kit
Includes:
Terminals
Seals
Housing
Cover
60 Amp Fuse..
$21.37
PART NUMBER: 109155
Universal Sealed MAXX-Fuse Holder Pigtail Kit
Pre crimped #8 wire 24" in length
Features sealed housing & 60 Amp Fuse and cinnecting Butt Splices...
$24.43
PART NUMBER: 109156
Universal MAXX-Relay Connector Kit
Includes:
70 Amp Relay, Relay Connector, Terminals and Seals
(can be used with 10 - 16 Gauged wire)..
$35.65
PART NUMBER: 109157
Universal sealed MAXX-Relay Holder Pigtail
KIT: Pre-Crimped colored wire 24" in length
sealed relay holder & 70 Amp relay
also includes butt splices and heat shrink ..
$50.95
PART NUMBER: 109158
Universal Sealed MAXX-Fuse Holder Pigtail KIt
Pre-crimped #10 Wire 24" in Length
Features sealed Housing & 50 Amp Fuse with connection Butt Splices..
$21.37
-15 %
PART NUMBER: 103004
Battery Junction Box Red and Black StudUseful for locating frequently accessed wires to an easily accessible location. Also great for use with relocated batteries. One red, one black stud. Red box has 10mm stud, black stud is an 8mm stud...
$26.95 $31.57
PART NUMBER: 103028
Designed for the "Do It Yourself" crowd, the 103028 Connector Kit contains a gray 2-way connector used on the Air Temp Sensor, known as "AIT" or "ATS", and a mating connector. The mate is a solder-type molded connector and the pinned connector is the "Pull-To-Seat" style which means you must first p..
$15.25
PART NUMBER: 103029
Designed for the "Do It Yourself" crowd, the 103029 Connector Kit contains a gray 2-way connector used on the Air Temp Sensor found on the DODGE vehicles, and a mating connector. Kit includes both male and female terminals and seals.Note: Sealed Double D style crimp tool is recommended...
$15.25
PART NUMBER: 103027
Designed for the "Do It Yourself" crowd, the 103027 Connector Kit contains a black 2-way connector used on the GM style Coolant Temp Sensor, and a mate for this connector. The mate is a solder-type molded connector and the pinned connector is the "Pull-To-Seat" style which means you must first push ..
$15.25
PART NUMBER: 103039
Typically,
wiring inside the passenger compartment is of a smaller gauge and
unsealed. This kit allows anyone from the hobbyist to the
professional racer to wire anything from gauges to stereos with
easy to use, inexpensive connectors plus maintain the ability
to disconnect and reconnec..
$45.95
PART NUMBER: 103071
This injection-molded bulkhead connector is specially designed to mate with the “bow” style connector commonly found on GM dash wiring clusters. The bow connector is normally installed into the dash cluster cradle, and when inserting the dash cluster, mates with the contacts on the flex PC board, co..
$67.27
PART NUMBER: 103019
Contains 2 ea. A, B, C, and D connectors used exclusively on the XFI ECU, along with 28 of the larger terminalsand 75 of the small terminals..
$42.79
PART NUMBER: 108116
Detail Dress up KitDetailing your engine wiring harness has never been easier using this kit. Included in this dress-up kit are seven different conduit sizes: 4.5mm, 72 inches6mm, 72 inches 9mm, 48 inches13mm, 36 inches16mm, 36 inches19mm, 36 inches22mm&nb..
$31.57
PART NUMBER: 106301
GT 2--Cavity Refill Kit 2 CavityThese Refill Kits are designed to replace depleted connectors in the Caspers Electronics Connector Kits. Three different styles of refill kits are available; Weatherpack®, Metripack® and GT® Series. GT® Series Refill Kits are supplied with connector mates, seals an..
$19.33
PART NUMBER: 106305
GT 6-Cavity Refill KitThese Refill Kits are designed to replace depleted connectors in the Caspers Electronics Connector Kits. Three different styles of refill kits are available; Weatherpack®, Metripack® and GT® Series. GT® Series Refill Kits are supplied with connector mates, seals and 18-16 ga..
$19.33
PART NUMBER: 103014
GT Connector KitThis kit contains a very useful selection of highly reliable Delphi GT-Series sealed connectors used extensively on newer GM cars and trucks. The GT style connectors fully sealed and modular in design, using wire retainers and cable seals. Connectors furnished in the kit are male and..
$99.91
PART NUMBER: 106302
GT Refill Kit 3 CavityThese Refill Kits are designed to replace depleted connectors in the Caspers Electronics Connector Kits. Three different styles of refill kits are available; Weatherpack®, Metripack® and GT® Series. GT® Series Refill Kits are supplied with connector mates, seals and 18-16 ga..
$19.33