PART NUMBER: 109004
12" SQR GRAY Extension When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this ca..
$26.47
PART NUMBER: 109005
24" SQR GRAY Extension When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this ca..
$26.47
PART NUMBER: 109019
IAT Extension 36" When installing aftermarket cold air intake in your vehicle, the inlet air temperature (air temp sensor / intake temp sensor) sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splic..
$26.47
PART NUMBER: 103032
Breather - LS1 & 3800
This is a chrome top Breather Assembly with heavy duty
billet Aluminum base. Bayonet type lock attaches securely
to the valve cover. Used on the LS1 GM engine and Supercharged 3800
Series II engine. Bayonet twist-lock mounts securely and seals with
an O rin..
$46.00
PART NUMBER: 109101
GT Boost Bypass Valve Add on Harness..
$12.19
PART NUMBER: 109063
Hi Speed Fan Kit Grand Am 99-05Control your engine heat! Cooler engines produce more power. Plug-and-Play Fan Harness overrides the ECU to manually control the coolant fan. Cooler engines produce more HP, and our top-quality fan kit gives you complete control. Uses sealed relays and OEM style w..
$105.01
-13 %
PART NUMBER: 108099
LS1 MAF to 3800 MAF PigtailOur 108099 Plug-in adapter is designed to adapt the current LS1 5-wire Mass Airflow Sensor to the GM 3800 Supercharged and NA engines, 1996-2002. Plug-in adapter has no provision for Airtemp Sensor, so only 3 of the 5 terminals on the LS1 MAF sensor are used. ..
$22.95 $26.47
PART NUMBER: 108125
MAF Adapter 3 pin w/ IAT to GTDesigned to facilitate the installation of a 5 wire WIDE pin spaced MAF (IE: 2006+ Z06) in a 3 wire MAF car (ie: 98 Camaro LS1). Break out is 6" long. Use with our IAT extensions (part numbers 109017 - 12", 109018 - 24" or 109019 - 36") for easy installation...
$26.47
PART NUMBER: 108124
MAF Adapter Hi-Density Small 5 pin to GT
INSTALLATIONin PDF format..
$26.47
PART NUMBER: 108126
MAF Splice 5 Pin GT with correct colors..
$26.47
PART NUMBER: 108136
MAF/IAT Breakout - GT Series DenseTypically found on the 05/06 Pontiac GTO, C5 Allows the use of an external, relocated IAT sensor. Uses OEM and custom made connectors for a sealed plug-and-play and OEM fit and finish. Please look at the connectors pictured closely and verify against what is on your..
$26.47
PART NUMBER: 108165
MAF/IAT Breakout GT Series
This is the WIDE GT connector. This connector is found on the G8, Modular MAF Corvette (such as the C6 Z06) with the BLACK MAF connector.
..
$26.47
PART NUMBER: 108100
Mass Air/Air Temp. Adapters
Plug-And-Play adapter converts the 3-wire LT1 engine harness connector to plug directly into the 5-wire LS1 MAF sensor. Incorporates the AirTemp connector into the adapter to connect directly to the gray AirTemp sensor connector from the engine harness. ..
$31.57
PART NUMBER: 109006
O2 Sensor Extension SQR 12" When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since th..
$26.47
PART NUMBER: 109007
O2 Sensor Extension SQR 24" When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since th..
$26.47
PART NUMBER: 109008
O2 Sensor Extension SQR 36" When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since th..
$26.47
PART NUMBER: 109009
O2 Sensor Extension SQR 42" When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since th..
$26.47
PART NUMBER: 109001
Single Wire 02 Extension 12" Used when installing long-tube headers which relocate the factory oxygen sensor. This plug-in harness allows for extending the connection. 12 in. long, one terminal round connector for GM passenger cars up until 1990...
$20.35
PART NUMBER: 109002
Single Wire 02 Extension 24" Used when installing long-tube headers which relocate the factory oxygen sensor. This plug-in harness allows for extending the connection. 12 in. long, one terminal round connector for GM passenger cars up until 1990...
$20.35