PART NUMBER: 109103
109103 LS1/LS2 to LS3/LS9 MAP ADAPTER05-07 Corvette , 06 GTO or later 3 bar map adapter can be used on a Corvette supercharger application
..
$26.47
PART NUMBER: 109103-26
109103 LS1/LS2 to LS3/LS9 MAP ADAPTER 26"05-07 Corvette , 06 GTO or later 3 bar map adapter can be used on a Corvette supercharger application
..
$26.47
PART NUMBER: 109004
12" SQR GRAY Extension When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this ca..
$26.47
PART NUMBER: 109133
ANOTHER EXCLUSIVE FROM CASPER'S ELECTROINCS!
Need to tap off the LS2 / LS7 Electronic Throttle Control cable for nitrous? Or are you installing a supercharger that requires you to cut the OEM wires and lengthen this connector? Well, you will not have to cut any longer! CASPER'S ELECTRONICS proud..
$48.91
PART NUMBER: 109005
24" SQR GRAY Extension When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this ca..
$26.47
PART NUMBER: 109019
IAT Extension 36" When installing aftermarket cold air intake in your vehicle, the inlet air temperature (air temp sensor / intake temp sensor) sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splic..
$26.47
PART NUMBER: 109049
A/F Pigtail SquareAllows aftermarket air-fuel gage to be added to your current front oxygen sensor signal, with complete plug-in capability. Signal wire exits the plug-in assembly and allows addition of wire to your gage...
$18.31
PART NUMBER: 103032
Breather - LS1 & 3800
This is a chrome top Breather Assembly with heavy duty
billet Aluminum base. Bayonet type lock attaches securely
to the valve cover. Used on the LS1 GM engine and Supercharged 3800
Series II engine. Bayonet twist-lock mounts securely and seals with
an O rin..
$46.00
PART NUMBER: 102159
Hi-Lo Fan Controller - C6 Corvette, Z06, ZR1 Part Number 102159 For Model Years 2005 - 2013 Finally, a manual fan controller for the C6! New design Plug And Play module installs easily to the PWM-controlled coolant fan found on the C6 Corvette. The factory coolant fan is powe..
$100.88
PART NUMBER: 102158
102158 Exhaust Valve Bypass Switch – C6 Corvette Z06
This kit is designed to permit instant manual bypass of the two exhaust valve butterfly valves present in the Z06 muffler, giving the driver full control of maximum exhaust flow. The 102158 is a Plug-And-Play which includes only the switch and pl..
$48.91
PART NUMBER: 108032
Coolant Fan HarnessLocated on cooling fan assembly. Includes the three wires with ring terminals, connects to fan motor and low speed resistor.KNOWN MAKES/MODELS: 86/87 GN C5 & C6 CORTVETTES..
$17.07
PART NUMBER: 108031
Coolant Fan Splice Engine SideReplaces broken/damaged harness end cooling fan connector. This connector has three female terminals and 12 gage wires.KNOWN MAKES/MODELS: 86/87 GN C5 & C6 CORTVETTES..
$17.29
-21 %
PART NUMBER: 102154
Corvette Hotwire 2003 C5 & C6This kit is designed to install into your late model Corvette and is designed to overcome the losses associated with factory wiring to the fuel pump. Because of the heavy 12 gage feed, sealed relay and attachment to the output stud of the alternator, extra voltage an..
$49.00 $62.30
PART NUMBER: 109082
LS1 Coilpack Extension 26"..
$28.90
PART NUMBER: 108195
LS2 to LS1 throttle body adapter (using Ls1 Throttle Body on an Ls2 vehicle)..
$48.91
PART NUMBER: 108115
LS2 TO LS1 Throttle Body Adapter HarnessNOTE: THIS HARNESS IS DESIGNED TO WORK WITH TBs THAT ARE 2005 TO 2008 ONLY! CHECK THE YEAR THAT THE TB IS DESIGNED FOR!!With this harness, it will allow the use of a LS2 throttle body on an LS1 vehicle. This harness is comprised of OEM connectors, terminals, l..
$48.91
PART NUMBER: 109226
O2 Extension 24" C6 Corvette or 2010+Camaro
When installing aftermarket headers and cat-back systems in your
vehicle, the oxygen sensor is frequently relocated, usually far
enough away from the original wiring location that the connector
cant be re-installed. You cannot cut and spl..
$26.47
PART NUMBER: 109227
O2 Extension C6 Corvette 36"
When installing aftermarket headers and cat-back systems in your
vehicle, the oxygen sensor is frequently relocated, usually far
enough away from the original wiring location that the connector
cant be re-installed. You cannot cut and splice oxygen sensor
wiring s..
$26.47
PART NUMBER: 109225
12" O2 Sensor Extension, for C6 Corvette OR 2010+ Camaro When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You ca..
$26.47